Danro PB220 Ink Roller



Danro PB220 Ink Roller – Supplied in packs of 5

Danro Price Guns use specific Danro Ink Rollers depending on the model of Danro price gun. For the Danro PB220 price gun, we supply the Danro 2316 ink roller. The Danro 2316 (or PB220) model pricing gun uses a 28mm inking roller.

If you are in any doubt about which ink roller you should buy, please call us on 01332 865933, so we can select the correct ink roller for you.

Fitting a Danro PB220 Inking Roller is simple

To install the ink roller, we recommend wearing nitrile or latex gloves to keep ink off your fingers then follow these simple steps:

  • Open the base of the Danro PB220 pricing gun.
  • Pull the ink roller carriage out.
  • Flex the retaining lugs to remove the old inking roller.
  • Insert the Danro PB220 ink roller.
  • Reseat carriage to its original position.
  • Close the Danro PB220 price gun.

How does the Danro PB220 Ink Roller work?

The Danro price gun ink roller is a foam roller that has been soaked in a viscous UV resistant ink. When the operator presses the lever of the pricing gun, the ink roller rotates as the print head moves across the face of the ink roller. This applies a thin layer of ink to the characters on the print head bands before the impression on the label.

The design of the Danro PB220 price gun means that the inking roller dispenses the correct amount of ink onto the print head bands each time a label is used. As a result of this process, the output of the price gun should mean the labels are uniform in presentation at all times until the ink roller is exhausted.

Each ink roller should last for around 15,000 impressions before the print output deteriorates.